BLUETTI AC300 + 1*B300 | Home Battery Backup

Up to 4. Friendly Note: which means that if the total power of your devices exceeds 700W.

Yes.

No, AC300 ONLY accepts B300 battery modules.

AC300 accepts up to 4 B300 / B300S batteries. You can also mix them in a power system. However, connecting with B300S is not recommended since its functions will be limited while working with AC300.

Yes. Connect with WiFi or Bluetooth, the BLUETTI App will allow you to control the AC300+B300 remotely, like switching the working modes and upgrading the firmware.

Recharge it with the wall outlet and solar panels at the same time, then you will get a maximum 5,400W input.

Yes. It supports 4 UPS modes: 1.Standard UPS (Recommended for regions with unstable grid power supply) 2.Time Control UPS (Charge the system during off-peak hours and power your loads when electricity prices are high) 3.PV Priority UPS (Recommended for regions with sufficient solar energy) 4.Customized UPS (Flexible to choose from the above 3 modes)

For details, please refer to the AC300 tutorial videos: AC300 | Power Station Tutorial B300 | Battery Module Tutorial

For details, please refer to the AC300 touchscreen guide below: AC300 | Touchscreen Guide

Standard Packing AC300: 1. 15A AC Charging Cable: 59in / 150cm 2. DC Input Cable: 59in / 150cm 3. Car Charging Cable: 20in / 50cm B300: P090D Battery Charging Cable: 31.5in / 80cm PV Charging Cable: 700mm Optional: 30A AC Charging Cable: 59in / 150cm. Lead-acid Battery Charging Cable: 20in / 50cm. 12V / 30A RV Cable: 31.5in / 80cm + 50cm P150D to P090D Cable: 31.5in / 80cm Communication Cable: 59in / 150cm Cigarette Lighter to DC5521 Cable (24V): 38in / 72cm Split-phase AC Charging Cable: 59in / 150cm USB-C to USB-C Cable: 79in / 200cm. Note: 1) All measurements are for reference only. 2) Package details are subject to change without prior notice.

No. The AC300 has no built-in battery, you can use it by pairing with B300 / B300S expansion battery.

No, AC300 is compatible with B300S or B300 ONLY.

The P090D cable is required for connecting AC300 with B300 and included in package, while connecting with B300S, P150D cable is required and sold separately.

20ms.

You can purchase it on other platforms, and 10 AWG and 12 AWG are highly recommended. This cable will result in a loss in PV input as the longer the cable, the higher the loss.

By connecting 2 AC300 units in series with the Fusion Box Pro (P030A).

For details, please refer to "how to build a partial backup system with AC300+B300".

Runtime = 3,072Wh* × DoD × η ÷ (load power) Note: 1) DoD refers to the Depth of Discharge, η is the local inverter efficiency. DoD=90%, η=90%. 2) The above data is for reference ONLY.

1. About 20W when AC300 is on, DC and AC are off; 2. About 50W when AC and DC are on.

Charging time (estimated) = (Total capacity / Charging power) + Trickle charge time The trickle charge time for BLUETTI power station is typically 0.5~1 hours.

1. 3,000W max. with 1* B300 (PV+AC); 2. 5,400W max. with 2* B300 or more (PV+AC).

1. AC300 accepts 1-6* PV120 / 1-5* PV200 / 1-3* PV350 / 1-3* PV420 solar panels. 2. Series connecting is highly commended for the best efficiency and durability. 3. Yes, but the extra current will be wasted. 4. Yes, however, please ensure the total voltage does not exceed 150V.

Yes, as soon as the solar panels meet the following conditions: 1) Total VOC: 12V~150V 2) Total power: 2,400W max. 3) With MC4 connectors.

Yes, as soon as your solar roof meet the following conditions: 1. Total VOC 12V~150V 2. With MC4 connectors Note: 1) The AC500 can be charged by microinverter ONLY through an AC outlet rather than directly charging, 2) When the VOC exceeds 150V, the BLUETTl D300S is required to step down the voltage to achieve solar charging (sold separately).

Yes. However, in this case, the AC300 will not display the charging power.

1. When the SoC drops to 5%, please charge the product immediately. 2. Before storing the product, charge it to 60% SOC to keep it in optimal condition. In addition, power off the unit and disconnect all electrical connections from it. 3. Store the product in a cool and dry place, keeping it away from flammable or combustible materials and gases. 4. The power station can be safely stored within a temperature range of -20°C to 45°C ( -4°F to 113°F). However, if the storage duration exceeds one month, it's recommended to maintain an ideal storage temperature of around 30°C (86°F). 5. Fully cycle the product every 3 months to maintain the battery's health.

Yes. AC300 features dual MPPT charge controllers, please ensure the solar panels in each controller are consistent.

1. The generator's output, voltage, and frequency should be within the range of AC300. 2. If the max output power of the generator can't meet the AC300's AC input, you can lower this AC input by reducing the max AC current. 3. The output of the generator should be sine wave.

Yes.

Yes. However, the max charging power would be limited to 100W / 200W. And please setup the "DC input source" to "Others".

Split Phase System can reach up to 6kW of output power and up to 24,576Wh of capacity for high-wattage loads and longer runtime.

No, please store it in a cool and dry place.