{"product_id":"victron-smallbms-f-smart-lifepo4-batteries-w-m8","title":"Victron SmallBMS f\/Smart LiFePO4 Batteries w\/M8","description":"\u003cp\u003e\u003cstrong\u003eSmallBMS for Smart LiFePO4 Batteries with M8\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA simple and low-cost alternative to the VE.Bus BMS. The smallBMS can replace the VE.Bus BMS in several applications. It is however not suitable for use with VE.Bus MultiPlus and Quattro inverter\/chargers: it has no VE.Bus interface.\u003c\/p\u003e\u003cp\u003eThe smallBMS is intended for use with Victron Smart LiFePo4 batteries with M8 circular connectors. The smallBMS has three outputs, similar to the VE.Bus BMS. Load Disconnect output The Load output is normally high and becomes free-floating in case of the cell under voltage (default 2,8V\/cell, adjustable on the battery between 2,6V and 2,8V per cell). Maximum current: 1A. The Load output is not short-circuit protected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Load output can be used to control:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eA high current relay or contactor.\u003c\/li\u003e\n\u003cli\u003eThe remote on\/off the input of a Battery Protect, inverter or DC-DC converter, or other loads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-alarm output\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pre-alarm output is normally free-floating and becomes high in case of the imminent cell under voltage (default 3,1V\/cell, adjustable on the battery between 2,85V and 3,15V per cell). Maximum current: 1A (not short circuit protected).\u003c\/p\u003e\u003cp\u003eThe minimum delay between pre-alarm and load disconnect is 30 seconds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCharge disconnect output\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Charger output is normally high and becomes free-floating in case of imminent cell overvoltage or over-temperature. Maximum current: 10mA. The Charger output is not suitable to power an inductive load such as a relay coil. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Charger output can be used to control:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe remote on\/off of a charger\u003c\/li\u003e\n\u003cli\u003eA Cyrix-Li-Charge relay\u003c\/li\u003e\n\u003cli\u003eA Cyrix-Li-ct Battery Combiner\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSystem on\/off input\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe system on\/off input controls both outputs. When off, both outputs will be free floating so that loads and chargers are turned off. The System on\/off consists of two terminals: Remote L and Remote H. A remote on\/off switch or relay contact can be connected between L and H. Alternatively, terminal H can be switched to battery plus, or terminal L can be switched to battery minus.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtects 12V, 24V and 48V systems\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOperating voltage range: 8 to 70V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLED indicators:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLoad ON (blue): Load output high (cell voltage \u0026gt;2.8V, adjustable on the battery).\u003c\/li\u003e\n\u003cli\u003eTemp or OVP (red): Charger output free floating (due to cell over temperature (\u0026gt;50°C), cell under temperature (\u0026lt;5 °C) or cell over voltage).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47798802153524,"sku":"BMS400100000","price":53.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smallbms-fsmart-lifepo4-batteries-wm8battery-managementbms400100000-3893786.jpg?v=1778722756","url":"https:\/\/offgridstores.com\/products\/victron-smallbms-f-smart-lifepo4-batteries-w-m8","provider":"Off Grid Stores","version":"1.0","type":"link"}