{"title":"Victron Energy","description":"","products":[{"product_id":"victron-smartsolar-mppt-150-70-tr-solar-charge-controller-ve-can-ul-approved","title":"Victron SmartSolar MPPT 150\/70-TR Solar Charge Controller - VE.CAN - UL Approved","description":"\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT 150\/70-TR VE.CAN - TR VE.CAN Solar Charge Control 150\/70-TR VE.CAN Controller\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSolar Charge Controller\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe MPPT VE.Can SmartSolar charger use the latest and fastest technology to convert energy from a solar array into energy that optimally charges battery banks?\u003cbr\u003e\u003cbr\u003eThe SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMPPT: Ultra Fast Maximum Power Point Tracking\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.\u003cbr\u003e\u003cbr\u003eThe charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium, and others.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControl Your Charger Remotely\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDaisy Chain Additional Units\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply \"daisy chained\" to each other with a single RJ45 cable between the individual units.\u003cbr\u003e\u003cbr\u003eWhen connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRemote Monitoring and Control\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eIf the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSmartSolar Control Display\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on\/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display\/control provides live-data, set-up and management, straight from the face of the device. \u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811666550836,"sku":"SCC115070411","price":435.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartsolar-mppt-15070-tr-solar-charge-controller-vecan-ul-approvedsolar-charge-controllersscc115070411-6612644.jpg?v=1769782750"},{"product_id":"victron-smartsolar-mppt-solar-charge-controller-250v-100am-ve-can-port-ul-approved","title":"Victron SmartSolar MPPT Solar Charge Controller - 250V - 100A - VE.CAN Port - UL Approved","description":"\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT VE CAN 250V-100A with VE.CAN Port\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges battery banks?\u003cbr\u003e\u003cbr\u003eThe SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMPPT: Ultra Fast Maximum Power Point Tracking\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe MPPT VE.Can SmartSolar charger connect to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.\u003cbr\u003e\u003cbr\u003eThe charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium, and others.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControl Your Charger Remotely\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe MPPT VE.Can SmartSolar charger be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDaisy Chain Additional Units\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe VE.Can SmartSolar charger isequipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply \"daisy-chained\" to each other with a single RJ45 cable between the individual units.\u003cbr\u003e\u003cbr\u003eWhen connected to each other, all individual VE.Can SmartSolar chargers, synchronize their charge stages. They can also send their data, via a single cable, to a GX monitoring device.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRemote Monitoring and Control\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eIf the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s). For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSmartSolar Control Display\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single-unit monitoring or for streetlight control. The remote on\/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display\/control provides live data, set-up, and management, straight from the face of the device.  \u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811666583604,"sku":"SCC125110412","price":643.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartsolar-mppt-solar-charge-controller-250v-100a-vecan-port-ul-approvedsolar-charge-controllersscc125110412-4248017.jpg?v=1769782749"},{"product_id":"victron-battery-switch-275a-12-48vdc-surface-or-panel-mount","title":"Victron Battery Switch 275A 12-48VDC Surface or Panel Mount","description":"\u003cp\u003e\u003cstrong\u003eBattery Switch 275A 12-48VDC Surface or Panel Mount\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Battery Switch ON\/OFF 275A is suitable for battery systems up to 48V. It has a unique ergonomic and aesthetic knob design. The knob is removable for isolation or safety purposes.\u003c\/p\u003e\u003cp\u003eThe Battery Switch can be either surface or panel mounted, providing flexibility during install.\u003c\/p\u003e\u003cp\u003eThe Battery Switch meets the ISO8846 Ignition Protection standard and is suitable for use in an engine room.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811666649140,"sku":"VBS127010010","price":43.17,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-battery-switch-275a-12-48vdc-surface-or-panel-mountbattery-switchesvbs127010010-2828301.jpg?v=1769782750"},{"product_id":"victron-smartsolar-mppt-150-60-tr-solar-charge-controller-ul-approved","title":"Victron SmartSolar MPPT 150\/60-TR Solar Charge Controller - UL Approved","description":"\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT 150\/60-TR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Victron SmartSolar MPPT 150\/60 Solar Charge Controller is Bluetooth accessible via either built-in Bluetooth or the Victron Energy Bluetooth dongle. The VictronConnect app is available for free on both iOS and Android. This app allows you to view plenty of parameters: battery voltage, solar history, load output, flexible battery charge algorithms, plus day\/night timing and light dimming options. These solar charge controllers will gather energy from your solar panels fast and efficiently. \u003c\/p\u003e\u003cp\u003eUltra-fast Maximum Power Point Tracking (MPPT) Especially in the case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. \u003c\/p\u003e\u003cp\u003eThe load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control is connected to the load output. A special interface cable may be needed, please see the manual Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMPPT: Ultra Fast Maximum Power Point Tracking\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBy constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811666681908,"sku":"SCC115060211","price":368.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartsolar-mppt-15060-tr-solar-charge-controller-ul-approvedsolar-charge-controllersscc115060211-5793119.jpg?v=1769782750"},{"product_id":"victron-busbar-to-connect-5-mega-fuse-holders-busbar-only-fuse-holders-sold-separately","title":"Victron Busbar to Connect 5 Mega Fuse Holders - Busbar Only Fuse Holders Sold Separately","description":"\u003cp\u003e\u003cstrong\u003eBusbar to Connect 5 Mega Fuse Holders \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBusbar Only Fuse Holders Sold Separately\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811666714676,"sku":"CIP100400060","price":43.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-busbar-to-connect-5-mega-fuse-holders-busbar-only-fuse-holders-sold-separatelybusbars-connectors-insulatorscip100400060-3363328.jpg?v=1769782750"},{"product_id":"victron-busbar-150a-2p-w-10-screws-amp-cover","title":"Victron Busbar 150A 2P w\/10 Screws \u0026amp; Cover","description":"\u003cp\u003e\u003cstrong\u003eBusbar 150A 2P with 10 Screws \u0026amp; Cover\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBusbars are used for high current distribution and at the same time they provide connections for batteries and\/or DC equipment.\u003c\/p\u003e\u003cp\u003eWe offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover.\u003c\/p\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811666747444,"sku":"VBB115021020","price":26.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-busbar-150a-2p-w10-screws-amp-coverbusbars-connectors-insulatorsvbb115021020-5503176.jpg?v=1769782749"},{"product_id":"victron-busbar-150a-2p-w-20-screws-amp-cover","title":"Victron Busbar 150A 2P w\/20 Screws \u0026amp; Cover","description":"\u003cp\u003e\u003cstrong\u003eBusbar 150A 2P with 20 Screws \u0026amp; Cover\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBusbars are used for high current distribution and at the same time they provide connections for batteries and\/or DC equipment.\u003c\/p\u003e\u003cp\u003eWe offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover.\u003c\/p\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811666780212,"sku":"VBB115022020","price":36.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-busbar-150a-2p-w20-screws-amp-coverbusbars-connectors-insulatorsvbb115022020-3893258.jpg?v=1769782750"},{"product_id":"victron-busbar-150a-4p-amp-cover-4x-1-4-terminals","title":"Victron Busbar 150A 4P \u0026amp; Cover 4X 1\/4\" Terminals","description":"\u003cp\u003e\u003cstrong\u003eBusbar 150A 4P \u0026amp; Cover 4X 1\/4\" Terminals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBusbars are used for high current distribution and at the same time they provide connections for batteries and\/or DC equipment.\u003c\/p\u003e\u003cp\u003eWe offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover.\u003c\/p\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811666812980,"sku":"VBB115040020","price":26.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-busbar-150a-4p-amp-cover-4x-14-terminalsbusbars-connectors-insulatorsvbb115040020-7132906.jpg?v=1769782749"},{"product_id":"victron-busbar-150a-6p-amp-cover-6x-1-4-terminals","title":"Victron Busbar 150A 6P \u0026amp; Cover 6X 1\/4\" Terminals","description":"\u003cp\u003e\u003cstrong\u003eBusbar 150A 6P \u0026amp; Cover 6X 1\/4\" Terminals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBusbars are used for high current distribution and at the same time they provide connections for batteries and\/or DC equipment.\u003c\/p\u003e\u003cp\u003eWe offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover.\u003c\/p\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811666845748,"sku":"VBB115060020","price":35.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-busbar-150a-6p-amp-cover-6x-14-terminalsbusbars-connectors-insulatorsvbb115060020-2153815.jpg?v=1769782749"},{"product_id":"victron-busbar-250a-2p-w-6-screws-amp-cover","title":"Victron Busbar 250A 2P w\/6 Screws \u0026amp; Cover","description":"\u003cp\u003e\u003cstrong\u003eBusbar 250A 2P with 6 Screws \u0026amp; Cover\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBusbars are used for high current distribution and at the same time they provide connections for batteries and\/or DC equipment.\u003c\/p\u003e\u003cp\u003eWe offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover.\u003c\/p\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811666878516,"sku":"VBB125020620","price":56.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-busbar-250a-2p-w6-screws-amp-coverbusbars-connectors-insulatorsvbb125020620-5762931.jpg?v=1769782691"},{"product_id":"victron-busbar-250a-2p-w-12-screws-amp-cover","title":"Victron Busbar 250A 2P w\/12 Screws \u0026amp; Cover","description":"\u003cp\u003e\u003cstrong\u003eBusbar 250A 2P with 12 Screws \u0026amp; Cover\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBusbars are used for high current distribution and at the same time they provide connections for batteries and\/or DC equipment.\u003c\/p\u003e\u003cp\u003eWe offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover.\u003c\/p\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811666976820,"sku":"VBB125021220","price":63.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-busbar-250a-2p-w12-screws-amp-coverbusbars-connectors-insulatorsvbb125021220-1935532.jpg?v=1769782691"},{"product_id":"victron-busbar-250a-4p-amp-cover-4x-5-16-terminals","title":"Victron Busbar 250A 4P \u0026amp; Cover 4X 5\/16\" Terminals","description":"\u003cp\u003e\u003cstrong\u003eBusbar 250A 4P \u0026amp; Cover 4X 5\/16\" Terminals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBusbars are used for high current distribution and at the same time they provide connections for batteries and\/or DC equipment.\u003c\/p\u003e\u003cp\u003eWe offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667009588,"sku":"VBB125040010","price":70.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-busbar-250a-4p-amp-cover-4x-516-terminalsbusbars-connectors-insulatorsvbb125040010-1026881.jpg?v=1769782691"},{"product_id":"victron-busbar-600a-4p-amp-cover-4x-3-8-plus-4x-m8-terminals","title":"Victron Busbar 600A 4P \u0026amp; Cover 4X 3\/8\" Plus 4X M8 Terminals","description":"\u003cp\u003e\u003cstrong\u003eBusbar 600A 4P \u0026amp; Cover 4X 3\/8\" Plus 4X M8 Terminals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBusbars are used for high current distribution and at the same time they provide connections for batteries and\/or DC equipment.\u003c\/p\u003e\u003cp\u003eWe offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667042356,"sku":"VBB160040010","price":146.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-busbar-600a-4p-amp-cover-4x-38-plus-4x-m8-terminalsbusbars-connectors-insulatorsvbb160040010-4710620.jpg?v=1769782691"},{"product_id":"victron-busbar-600a-8p-amp-cover-8x-3-8-plus-8x-m8-terminals","title":"Victron Busbar 600A 8P \u0026amp; Cover 8X 3\/8\" Plus 8X M8 Terminals","description":"\u003cp\u003e\u003cstrong\u003eBusbar 600A 8P \u0026amp; Cover 8X 3\/8\" Plus 8X M8 Terminals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBusbars are used for high current distribution and at the same time they provide connections for batteries and\/or DC equipment.\u003c\/p\u003e\u003cp\u003eWe offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667107892,"sku":"VBB160080010","price":222.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-busbar-600a-8p-amp-cover-8x-38-plus-8x-m8-terminalsbusbars-connectors-insulatorsvbb160080010-8813096.jpg?v=1769782691"},{"product_id":"victron-orion-tr-smart-12-24-10-amp-240w-isolated-dc-dc-charger-or-power-supply","title":"Victron Orion-Tr Smart 12\/24 10 AMP (240W) Isolated DC-DC Charger or Power Supply","description":"\u003cp\u003e\u003cstrong\u003eOrion-TR Smart 12\/24-10A (240W) Isolated DC-DC Charger or Power Supply\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Orion-Tr Smart isolated DC-DC charger serves as a DC-DC battery charger or a power supply (also designed for use as a constant voltage source), offering a wide input and output voltage range. This is especially significant in the case of vehicles with a Euro 5 or Euro 6 smart alternator, which often supplies too low charging voltage even when the engine is running or when extended cable lengths, as is often the case in boats and RVs, lead to voltage drops. In such scenarios, precise and controlled charging is imperative to fully charge the service battery while protecting the starter\/input battery from discharge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBluetooth Smart Enabled\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAny Bluetooth-enabled smartphone, tablet, or other device can be used to monitor, change settings, and update the charger when new software features become available\u003c\/li\u003e\n\u003cli\u003eInstant Readout: The VictronConnect App can display key data, including warnings and alarms, on the device list page without the need to connect to the product\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFully programmable\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery charge algorithm (configurable) or fixed output. \u003c\/li\u003e\n\u003cli\u003eSmart Alternator Compatibility: engine running detection mechanism\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAdaptive 3-Stage Charge Algorithm: Bulk – Absorption – Float\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor lead-acid batteries, it is important that during shallow discharges the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged\u003c\/li\u003e\n\u003cli\u003eFor lithium batteries, the absorption time is fixed; the default is 2 hours\u003c\/li\u003e\n\u003cli\u003eAlternatively, a fixed output voltage can be chosen\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSuitable for Use in Vehicles with a Smart Alternator (Euro 5 and Euro 6 Engines)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe built-in engine shutdown detection will stop the converter when the engine is not running. This prevents unwanted discharge of the starter battery (see manual for details).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRemote On\/Off\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA remote on\/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll Models Are Short Circuit Proof and Can Be Paralleled to Increase Output Current\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn unlimited number of units can be connected in parallel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHigh Temperature Protected\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe output current will reduce at high ambient temperatures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIP43 Protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen installed with the screw terminals oriented downward.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScrew Terminals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo special tools are needed for installation. Input fuse (not replaceable) \u003c\/p\u003e\u003cp\u003e*Input fuse (not replaceable) \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage Range: 8-17 V\u003c\/li\u003e\n\u003cli\u003eUnder Voltage Shut Down: 7 V\u003c\/li\u003e\n\u003cli\u003eUnder Voltage Restart: 7.5 V\u003c\/li\u003e\n\u003cli\u003eNominal Output Voltage: 24.2 V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Adjust Range: 20-30 V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Tolerance: +\/- 0,2 V\u003c\/li\u003e\n\u003cli\u003eOutput Noise: 2 mV rms\u003c\/li\u003e\n\u003cli\u003eCont. Output Current at Nominal Output Voltage and 40 Degrees C: 10 A\u003c\/li\u003e\n\u003cli\u003eMaximum Output Current (10 S) at Nominal Output Voltage minus 20%: 15 A\u003c\/li\u003e\n\u003cli\u003eShort Circuit Output Current: 25 A\u003c\/li\u003e\n\u003cli\u003eCont. Output Power at 25 Degrees C: 280 W\u003c\/li\u003e\n\u003cli\u003eCont. Output Power at 40 Degrees C: 240 W\u003c\/li\u003e\n\u003cli\u003eEfficiency: 88 %\u003c\/li\u003e\n\u003cli\u003eNo Load Input Current (2): \u0026lt; 100 mA \u003c\/li\u003e\n\u003cli\u003eStandby Current: Less than 1A\u003c\/li\u003e\n\u003cli\u003eCan Be Used as Power Supply: Yes, output voltage can be set with Bluetooth \u003c\/li\u003e\n\u003cli\u003eGalvanic Isolation: 200 VDC between input, output, and case \u003c\/li\u003e\n\u003cli\u003eOperating Temperature Range -20 to +55 °C (derate 3 % per °C above 40 °C) \u003c\/li\u003e\n\u003cli\u003eHumidity: Max. 95 % non-condensing \u003c\/li\u003e\n\u003cli\u003eDC Connection: Screw terminals \u003c\/li\u003e\n\u003cli\u003eMaximum Cable Cross-Section: 16 mm²  AWG6 \u003c\/li\u003e\n\u003cli\u003eWeight: 1,8 kg (3 lb) \u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D):130 x 186 x 70 mm  (5.1 x 7.3 x 2.8 inch) \u003c\/li\u003e\n\u003cli\u003eProtection Category IP43 (electronic components), IP22 (connection area) \u003c\/li\u003e\n\u003cli\u003eSafety Standards: EN 60950\u003c\/li\u003e\n\u003cli\u003eEmission\/Immunity Standards: EN 61000-6-3, EN 55014-1 \/ EN 61000-6-2, EN 61000-6-1, EN 55014-2\u003c\/li\u003e\n\u003cli\u003eAutomotive Directive Standards: ECE R10-5\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667173428,"sku":"ORI122424120","price":162.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-orion-tr-smart-1224-10-amp-240w-isolated-dc-dc-charger-or-power-supplydc-to-dc-chargersori122424120-6131955.jpg?v=1769782691"},{"product_id":"victron-smartsolar-mppt-150-45-solar-charge-controller","title":"Victron SmartSolar MPPT 150\/45 Solar Charge Controller","description":"\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT 150\/45 Solar Charge Controller\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA solar charger gathers energy from your solar panels, and stores it in your batteries.  Using the latest, fastest technology, SmartSolar maximizes this energy harvest, driving it intelligently to achieve full charge in the shortest possible time.  SmartSolar maintains battery health, extending its life.\u003c\/p\u003e\u003cp\u003eThe SmartSolar charge controller will even recharge a severely depleted battery.  It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMPPT - Ultra Fast Maximum Power Point Tracking - By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.  The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.\u003c\/li\u003e\n\u003cli\u003eRemote Monitoring and Control - Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or another device via VictronConnect.\u003c\/li\u003e\n\u003cli\u003eAdvanced Maximum Power Point Detection in case of partial shading conditions. \u003c\/li\u003e\n\u003cli\u003eOutstanding conversion efficiency. \u003c\/li\u003e\n\u003cli\u003eNatural convection cooling. \u003c\/li\u003e\n\u003cli\u003eAutomatic battery voltage recognition. \u003c\/li\u003e\n\u003cli\u003eFlexible charge algorithm. \u003c\/li\u003e\n\u003cli\u003eOver-temperature protection and power derating when the temperature is high. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDimensions (L x W x H) - 7.3\" x  5.2\" x  2.8\" (186 x 132 x 71mm) \u003c\/li\u003e\n\u003cli\u003eBattery Voltage - 12\/24\/36\/48V \u003c\/li\u003e\n\u003cli\u003eRated Charge Current - 45A\u003c\/li\u003e\n\u003cli\u003eMax. PV Short Circuit Current - 50A\u003c\/li\u003e\n\u003cli\u003eMaximum Efficiency - 98%\u003c\/li\u003e\n\u003cli\u003eData Communication Port - VE. Direct\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e150\/45 Solar Charge Controller\u003c\/li\u003e\n\u003cli\u003eInstruction Manual \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Sold as an Individual\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667206196,"sku":"SCC115045212","price":229.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartsolar-mppt-15045-solar-charge-controllersolar-charge-controllersscc115045212-3369623.jpg?v=1769782691"},{"product_id":"victron-smart-solar-mppt-150-85-tr-ve-can","title":"Victron Smart Solar MPPT 150\/85-TR VE.Can","description":"\u003cp\u003e\u003cstrong\u003eSmart Solar MPPT 150\/85-TR VE.Can\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.\u003c\/p\u003e\u003cp\u003eThe SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMPPT: Ultra Fast Maximum Power Point Tracking\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBy constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRemote Monitoring \u0026amp; Control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRemotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or another device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the  GlobalLink 520.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLoad Output\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains health, and extends the life of your battery.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667238964,"sku":"SCC115085411","price":476.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smart-solar-mppt-15085-tr-vecansolar-charge-controllersscc115085411-2145617.jpg?v=1769782691"},{"product_id":"victron-smartshunt-500a-50mv-ip65-bluetooth-battery-monitor","title":"Victron SmartShunt 500A\/50MV IP65 Bluetooth Battery Monitor","description":"\u003cp\u003e\u003cstrong\u003eSmartShunt 500A\/50MV IP65 Bluetooth Battery Monitor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Smart Battery Shunt\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information, and much more.\u003c\/p\u003e\u003cp\u003eAlternatively, the SmartShunt can be connected and read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.\u003c\/p\u003e\u003cp\u003eThe SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter are wanted.\u003c\/p\u003e\u003cp\u003eThe SmartShunt is equipped with Bluetooth, and a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring, or a temperature sensor.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667271732,"sku":"SHU065150050","price":115.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartshunt-500a50mv-ip65-bluetooth-battery-monitorbattery-monitors-shuntsshu065150050-1225680.jpg?v=1769782691"},{"product_id":"victron-smartshunt-1000a-50mv-ip65-bluetooth-battery-monitor","title":"Victron SmartShunt 1000A\/50MV IP65 Bluetooth Battery Monitor","description":"\u003cp\u003e\u003cstrong\u003eSmartShunt 1000A\/50MV IP65 Bluetooth Battery Monitor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Smart Battery Shunt\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information, and much more.\u003c\/p\u003e\u003cp\u003eAlternatively, the SmartShunt can be connected and read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.\u003c\/p\u003e\u003cp\u003eThe SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter are wanted.\u003c\/p\u003e\u003cp\u003eThe SmartShunt is equipped with Bluetooth and a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring, or a temperature sensor.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667304500,"sku":"SHU065210050","price":167.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartshunt-1000a50mv-ip65-bluetooth-battery-monitorbattery-monitors-shuntsshu065210050-5379182.jpg?v=1769782690"},{"product_id":"victron-smartshunt-2000a-50mv-ip65-bluetooth-battery-monitor","title":"Victron SmartShunt 2000A\/50MV IP65 Bluetooth Battery Monitor","description":"\u003cp\u003e\u003cstrong\u003eSmartShunt 2000A\/50MV IP65 Bluetooth Battery Monitor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Smart Battery Shunt\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information, and much more.\u003c\/p\u003e\u003cp\u003eAlternatively, the SmartShunt can be connected and read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.\u003c\/p\u003e\u003cp\u003eThe SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter are wanted.\u003c\/p\u003e\u003cp\u003eThe SmartShunt is equipped with Bluetooth and a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring, or a temperature sensor.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667337268,"sku":"SHU065220050","price":226.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartshunt-2000a50mv-ip65-bluetooth-battery-monitorbattery-monitors-shuntsshu065220050-1471362.jpg?v=1769782691"},{"product_id":"victron-smartsolar-mppt-250-60-tr-solar-charge-controller","title":"Victron SmartSolar MPPT 250\/60-TR Solar Charge Controller","description":"\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT 250\/60-TR Solar Charge Controller\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.\u003c\/p\u003e\u003cp\u003eThe SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMPPT: Ultra Fast Maximum Power Point Tracking\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBy constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRemote Monitoring \u0026amp; Control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRemotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or another device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the  GlobalLink 520.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLoad Output\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667370036,"sku":"SCC125060221","price":435.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartsolar-mppt-25060-tr-solar-charge-controllersolar-charge-controllersscc125060221-1778847.jpg?v=1769782691"},{"product_id":"victron-lynx-smart-bms-1000-battery-management-system-f-lithium-smart-batteries","title":"Victron Lynx Smart BMS 1000 Battery Management System f\/Lithium Smart Batteries","description":"\u003cp\u003e\u003cstrong\u003eLynx Smart BMS 1000 Battery Management System for Lithium Smart Batteries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Lynx Smart BMS is a dedicated Battery Management System (BMS) for the Victron Lithium Battery Smart batteries. These batteries are Lithium Iron Phosphate (LiFePO4) batteries and are available in 12.8 V or 25.6 V in various capacities. They can be connected in series, parallel, and series\/parallel so that a battery bank can be built for system voltages of 12V, 24 V, or 48 V. The maximum number of batteries in one system is 20, which results in a maximum energy storage of 84 kWh in a 12 V and up to 102 kWh in a 24 V1) and 48 V1) system.\u003c\/p\u003e\u003cp\u003eOut of the various available BMSes, the Lynx Smart BMS is the most feature-rich and complete option and integrates seamlessly into the Lynx Distributor system. This model is a 1000 A (M10) version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt-in 1000 A Contactor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe contactor acts as a secondary safety system to protect the battery in case the primary controls (ATC, ATD, and\/or DVCC) fail to disable loads and\/or chargers when required and is also suitable as a remote controllable main system switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-charge Circuit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn addition to the contactor, a built-in pre-charge circuit prevents high inrush currents when connecting a capacitive load such as a MultiPlus\/Quattro or other inverter, eliminating the need for external pre-charging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMonitoring and Control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMonitor and control the BMS via Bluetooth using the VictronConnect App or a GX device such as a Cerbo GX and the VRM Portal. A built-in battery monitor that operates similarly as the other Victron Energy battery monitors, provides data such as state of charge, voltage, current, historical data, status info, and more in real-time and with instant readout even without the need to connect to the BMS, allowing diagnostic at a glance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDVCC closed Loop Control as Well as ATC\/ATD Contacts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCompatible Victron inverters\/chargers and solar chargers are automatically controlled via a connected GX device and DVCC. The ATC\/ATD contacts can be used to control other chargers and loads that have a remote on\/off port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProgrammable Relay\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe relay can be used either as an alarm relay (combined with the pre-alarm) or to control an alternator via its external regulator (ignition cable). In Alternator ATC mode, the relay will only activate when the contactor is closed. Alternator ATC contact of the alternator opens first and then with a delay of 2 seconds the contactor. These 2 seconds ensure that the alternator is switched off before the battery is disconnected from the system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAUX Terminal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe advantage of the onboard auxiliary power supply (1.1 A @ system voltage) is to provide power to specific loads (i.e. a GX device) after the BMS has shut down the loads in the event of a low cell voltage event. If no charge voltage is detected within 5 minutes, the BMS, including the AUX connection switches off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVE.Can and NMEA 2000 Data Communication\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVE.Can allows for easy connection (standard RJ45 network cable) and communication with a GX device. Since the CANbus protocol is based on NMEA 2000 (and J1939), it is easy to integrate into a marine network and feed a marine MFD with data (requires a VE.Can to NMEA 2000 micro-C male cable).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLynx Distributor Fuse Monitoring\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRead out the fuse status and receive an alarm in case a fuse is blown. The Lynx Smart BMS monitors up to 4 connected Lynx Distributors and their fuses via VictronConnect or a GX device 1) To reduce the required balancing time, we recommend using as many different batteries in series as possible for the application. 24 V systems are best built using 24 V batteries, and a 48 V system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis System Contains the Following Components:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLynx Distributor with 2 fused paralleled lithium-ion smart batteries.\u003c\/li\u003e\n\u003cli\u003eLynx Smart BMS with BMS, contactor, and battery monitor\u003c\/li\u003e\n\u003cli\u003eA second Lynx distributor provides fused connections for inverter\/charger(s), loads and chargers (additional modules can be added if more connections are needed)\u003c\/li\u003e\n\u003cli\u003eA Cerbo GX (or other GX device) to read out the Lynx Smart BMS and Lynx Distributor data.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery Voltage Range: 9 – 60 VDC\u003c\/li\u003e\n\u003cli\u003eMaximum Input Voltage: 75 VDC\u003c\/li\u003e\n\u003cli\u003eSupported System Voltages: 12, 24, or 48 V\u003c\/li\u003e\n\u003cli\u003eReverse Polarity Protection: No\u003c\/li\u003e\n\u003cli\u003eMain Safety Contactor Continuous Current Rating: 1000 A continuous\u003c\/li\u003e\n\u003cli\u003eMain Safety Contactor Peak Current Rating: 1200 A for 5 minutes \u003c\/li\u003e\n\u003cli\u003ePower Consumption OFF Mode: 0.3 mA for all system voltages\u003c\/li\u003e\n\u003cli\u003ePower Consumption in Standby Mode: Approximately 0.6 W (50 mA at 12 V)\u003c\/li\u003e\n\u003cli\u003ePower Consumption in ON Mode: Approx. 2.6 W (217 mA at 12 V) depending on the state of the relays\u003c\/li\u003e\n\u003cli\u003eApproximately 4.2 W (350 mA at 12 V) depending on the state of the relays\u003c\/li\u003e\n\u003cli\u003eMinimum Load Resistance for Pre-Charging: 10 Ω and above for 12 V systems, 20 Ω and above for 24 V and 48 V systems\u003c\/li\u003e\n\u003cli\u003eAUX Output Maximum Current Rating: 1.1 A continuous, protected by resettable fuse\u003c\/li\u003e\n\u003cli\u003eAllow-to-Charge Port Maximum Current Rating: 0.5 A at 60 VDC, protected by a resettable fuse\u003c\/li\u003e\n\u003cli\u003eAllow-to-Discharge Port Maximum Current Rating: 0.5 A at 60VDC, protected by a resettable fuse\u003c\/li\u003e\n\u003cli\u003eAlarm Relay (SPDT) Maximum current Rating: 2 A at 60 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBusbar: M10 (Torque: 17 Nm)\u003c\/li\u003e\n\u003cli\u003eVE.Can: RJ45\u003c\/li\u003e\n\u003cli\u003eI\/O: Removable multi-connector with screw terminals\u003c\/li\u003e\n\u003cli\u003eBattery BTV Cables: Male and female circular 3-pole connector with M8 screw ring Up to 20 batteries can be connected in one system Lynx Distributor fuse monitoring (up to 4 modules) RJ10 (cable ships with each Lynx Distributor)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePhysical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnclosure Material: ABS\u003c\/li\u003e\n\u003cli\u003eEnclosure Dimensions (h x w x d): 230 x 180 x 100 mm\u003c\/li\u003e\n\u003cli\u003eUnit Weight: 2.7 kg\u003c\/li\u003e\n\u003cli\u003eBusbar Material: Tinned copper\u003c\/li\u003e\n\u003cli\u003eBusbar Dimensions (h x w): 8 x 30 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnvironmental Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating Temperature Range: -40 °C to +60 °C\u003c\/li\u003e\n\u003cli\u003eStorage Temperature Range: -40 °C to +60 °C\u003c\/li\u003e\n\u003cli\u003eHumidity Max.: 95 % (non-condensing)\u003c\/li\u003e\n\u003cli\u003eProtection Class: IP22\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSafety: EN-IEC 63000:2018\u003c\/li\u003e\n\u003cli\u003eEMC: EN-IEC 61000-6-3:2007\/A1:2011\/AC:2012\u003c\/li\u003e\n\u003cli\u003eQMS: NEN-EN-ISO 9001:2015\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667435572,"sku":"LYN034170210","price":1178.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-lynx-smart-bms-1000-battery-management-system-flithium-smart-batteriesbattery-management-systemslyn034170210-3733330.jpg?v=1769782690"},{"product_id":"victron-lynx-distributor-w-m10-terminals","title":"Victron Lynx Distributor w\/M10 Terminals","description":"\u003cp\u003e\u003cstrong\u003eLynx Distributor with M10 Terminals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Lynx Distributor contains a positive and a negative busbar. The positive busbar has four fuse-protected connections with fuse monitoring. The negative busbar has four connections and a ground connection. This model is part of the Lynx distribution and is a M10 busbar model. Note that M10 refers to the busbar connection joints where the modules are connected. The fuse and cable connections are always M8.\u003c\/p\u003e\u003cp\u003eThe Lynx Distributor has a power LED and four fuse status indication LEDs. If connected to a Lynx Smart BMS, up to 4 Lynx Distributors can send fuse status information to the Lynx Smart BMS. This feature is not available when connected to a Lynx Shunt VE.Can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1000A model with M10 busbars\u003c\/li\u003e\n\u003cli\u003eThe Lynx Distributor ships together with a 40cm RJ10 cable, which provides power to the Lynx Distributor and is also used to transmit data if connected to a Lynx Smart BMS\u003c\/li\u003e\n\u003cli\u003eThe Lynx Distributor is designed to hold MEGA fuses\u003c\/li\u003e\n\u003cli\u003eIf the Lynx Distributor is connected to a Lynx Smart BMS, it can be monitored and set up with the VictronConnect App\u003c\/li\u003e\n\u003cli\u003eUp to 4 connected Lynx distributors can be monitored with a GX device if connected to a Lynx Smart BMS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThe Lynx Distribution System\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Lynx Distribution System is a modular busbar system that incorporates DC connections, distribution, fusing, and battery monitoring and\/or lithium battery management.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Lynx Distribution System Consists of the Following Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLynx Power In\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA positive and negative busbar with four batteries or DC equipment connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLynx Distributor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA positive and negative busbar with four fused connections for batteries or DC equipment and fuse monitoring, is available in two versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLynx Shunt VE.Can\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA positive busbar with a space for a main system fuse and a negative busbar with a shunt for battery monitoring. It has VE.Can communication for monitoring and setup with a GX device.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLynx Smart BMS\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFor use together with Victron Energy Smart Lithium batteries. It contains a positive busbar with a contactor driven by a battery management system (BMS) and a negative busbar with a shunt for battery monitoring.\u003c\/p\u003e\u003cp\u003eIt has Bluetooth communication for monitoring and setup via the VictronConnect App and VE.Can communication for monitoring with a GX device and the VRM portal. Available as a 1000A model with M10 busbars.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667468340,"sku":"LYN060102010","price":232.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-lynx-distributor-wm10-terminalsfuse-blocks-fuseslyn060102010-4055495.jpg?v=1769782690"},{"product_id":"victron-lynx-power-in-class-t-m10-terminals","title":"Victron Lynx Power-In Class-T M10 Terminals","description":"\u003cp\u003e\u003cstrong\u003eLynx Power-In Class-T M10 Terminals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Lynx Class-T Power In connects and fuses up to two strings of lithium batteries. It features a positive and negative busbar, connections for two Class-T fuses, and a connection to ground the DC system. The Class T-fuses, are available in 225A, 250A, 350A, and 400A (must be purchased separately).\u003c\/p\u003e\u003cp\u003eFor installations using three or more strings of lithium batteries, use multiple Lynx Class-T modules. As a core component of the Lynx Distribution system, the Lynx Class-T seamlessly integrates with all other M10 Lynx products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Lynx Distribution System\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Lynx Distribution System is a modular busbar system that incorporates DC connections, distribution, fusing, and battery monitoring and\/or lithium battery management. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Lynx Distribution System Consists of the Following Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLynx Power In\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA positive and negative busbar with four batteries or DC equipment connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLynx Distributor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA positive and negative busbar with four fused connections for batteries or DC equipment and fuse monitoring is available in two versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLynx Shunt VE.Can\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA positive busbar with a space for a main system fuse and a negative busbar with a shunt for battery monitoring. It has VE.Can communication for monitoring and setup with a GX device.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLynx Smart BMS\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFor use together with Victron Energy Smart Lithium batteries. It contains a positive busbar with a contactor driven by a battery management system (BMS) and a negative busbar with a shunt for battery monitoring.\u003c\/p\u003e\u003cp\u003eIt has Bluetooth communication for monitoring and setup via the VictronConnect App and VE.Can communication for monitoring with a GX device and the VRM portal. Available as a 1000A model with M10 busbars.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoltage Range: 9 - 60Vdc\u003c\/li\u003e\n\u003cli\u003eCurrent Rating: 1000Adc continuous \u003c\/li\u003e\n\u003cli\u003eConnections: M10\u003c\/li\u003e\n\u003cli\u003eBusbar: 3\/8”\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePhysical:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnclosure Material: ABS\u003c\/li\u003e\n\u003cli\u003eEnclosure Dimensions (H x W x D): 279 x 169 x 97mm\u003c\/li\u003e\n\u003cli\u003eUnit Weight: 2.1 kg\u003c\/li\u003e\n\u003cli\u003eBusbar Material: Tinned copper\u003c\/li\u003e\n\u003cli\u003eBusbar Dimensions (H x W): 8 x 30mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnvironmental:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating Temperature Range: -40°C to +60°\u003c\/li\u003e\n\u003cli\u003eStorage Temperature Range: -40°C to +60°\u003c\/li\u003e\n\u003cli\u003eHumidity: Max. 95% (non-condensing)\u003c\/li\u003e\n\u003cli\u003eProtection Class: IP20\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667501108,"sku":"LYN060404010","price":187.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-lynx-power-in-class-t-m10-terminalsfuse-blocks-fuseslyn060404010-4167500.jpg?v=1769782689"},{"product_id":"victron-lynx-smart-bms-500-ng-m10","title":"Victron Lynx Smart BMS 500 NG (M10)","description":"\u003cp\u003e\u003cstrong\u003eLynx Smart BMS 500 NG (M10)\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThe Lynx Smart BMS NG is a dedicated Battery Management System (BMS) designed specifically for the Victron Lithium NG batteries. These batteries utilize Lithium Iron Phosphate (LiFePO4) technology and are available in 12.8 V, 25.6 V, and 51.2 V variants with various capacities. They can be configured in series, parallel, and series\/parallel arrangements, allowing for the creation of battery banks with system voltages of 12V, 24V, or 48V. The maximum number of batteries in a single system is 50, enabling a maximum energy storage of 192kWh in a 12V system and up to 384kWh in a 24V and 48V system. For comprehensive details about these batteries, visit the Victron Lithium NG battery product page. \u003c\/p\u003e\u003cp\u003eOut of the various BMSes available* for the Lithium NG batteries, the Lynx Smart BMS NG is the most feature-rich and complete option and integrates seamlessly with other M10 products in the Lynx Distributor system. It is available in 500 A (M10) and 1000 A (M10) versions\u003csup\u003e1\u003c\/sup\u003e).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt-in 500 A or 1000 A Contactor \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAvailable in 500 A (M10) and 1000 A (M10) versions\u003c\/li\u003e\n\u003cli\u003eActs as a secondary safety system to protect the battery in case primary controls (ATC, ATD, and\/or DVCC) fail\u003c\/li\u003e\n\u003cli\u003eSuitable as a remote controllable main system switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-Charge Circuit \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents high inrush currents when connecting capacitive loads like inverters\u003c\/li\u003e\n\u003cli\u003eEliminates the need for external pre-charging devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMonitoring \u0026amp; Control \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBluetooth connectivity for monitoring and control via the VictronConnect App or VE.Can connectivity in combination with GX devices such as the Cerbo GX or Ekrano GX and the VRM portal\u003c\/li\u003e\n\u003cli\u003eReadout of cell voltages and temperatures also on GX devices and the VRM portal\u003c\/li\u003e\n\u003cli\u003eBuilt-in battery monitor provides data such as state of charge, voltage, current, historical data, status info, and more in real-time\u003c\/li\u003e\n\u003cli\u003eDiagnostic at a Glance with Instant Readout\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDVCC Closed Loop Control as well as ATC\/ATD Contacts \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible Victron inverter\/chargers, the Orion XS 12\/12-50A DC-DC battery charger, and solar charge controllers are automatically controlled via a connected GX device and DVCC.\u003c\/li\u003e\n\u003cli\u003eATC\/ATD contacts can be used to control other chargers and loads that have a remote on\/off port\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProgrammable Relay \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCan be used either as an alarm relay (combined with the pre-alarm) or to control an alternator via its external regulator (ignition cable)\u003c\/li\u003e\n\u003cli\u003eFeatures Alternator ATC mode for safe alternator disconnection before battery disconnects\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAUX Terminal \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOnboard auxiliary power supply (1.1 A @ system voltage) for powering specific loads (i.e. a GX device) post-BMS shutdown\u003c\/li\u003e\n\u003cli\u003eAutomatic shutdown of BMS and AUX connection if no charge voltage is detected within 5 minutes after a low voltage event\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVE.Can and NMEA 2000 Data Communication \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasy connection and communication with GX devices via VE.Can using a standard RJ45 network cable\u003c\/li\u003e\n\u003cli\u003eIntegration into marine networks via NMEA 2000 protocol (requires a VE.Can to NMEA 2000 micro-C male cable)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eLynx Distributor Fuse Monitoring \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMonitor fuse status of up to 4 connected Lynx Distributors via VictronConnect or GX devices\u003c\/li\u003e\n\u003cli\u003eReceive alarms in case of blown fuses\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003csup\u003e1\u003c\/sup\u003e) Up to 5 BMS-es can be paralleled. This requires a firmware update, expected in Q3 2024.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery Voltage Range: 9 – 60 VDC \u003c\/li\u003e\n\u003cli\u003eMaximum Input Voltage: 75 VDC \u003c\/li\u003e\n\u003cli\u003eSupported System Voltages: 12, 24, or 48V \u003c\/li\u003e\n\u003cli\u003eReverse Polarity Protection: No \u003c\/li\u003e\n\u003cli\u003eMain Safety Contactor Continuous Current Rating: 500 A continuous \u003c\/li\u003e\n\u003cli\u003eMain Safety Contactor Peak Current Rating: 600 A for 5 minutes \u003c\/li\u003e\n\u003cli\u003ePower Consumption OFF Mode: 0.3 mA for all system voltages \u003c\/li\u003e\n\u003cli\u003ePower Consumption in Standby Mode: Approximately 0.6 W (50 mA at 12 V) \u003c\/li\u003e\n\u003cli\u003ePower Consumption in ON Mode: Approx. 2.6 W (217 mA at 12 V) depending on the state of the relays \u003c\/li\u003e\n\u003cli\u003eMinimum Load Resistance for Pre-Charging: 10 Ω and above for 12 V systems 20 Ω and above for 24 V and 48 V systems \u003c\/li\u003e\n\u003cli\u003eAUX Output Maximum Current Rating: 1.1 A continuous, protected by resettable fuse \u003c\/li\u003e\n\u003cli\u003eAllow-to-Charge Port Maximum Current Rating: 0.5 A at 60 VDC, protected by resettable fuse \u003c\/li\u003e\n\u003cli\u003eAllow-to-Discharge Port Maximum Current Rating: 0.5 A at 60VDC, protected by resettable fuse\u003c\/li\u003e\n\u003cli\u003eAlarm Relay (SPDT) Maximum Current Rating: 2 A at 60 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBusbar: M10 (Torque: 33 Nm) – can be combined with all M10 Lynx products \u003c\/li\u003e\n\u003cli\u003eVE.Can: RJ45 \u003c\/li\u003e\n\u003cli\u003eI\/O: Removable multi-connector with screw terminals \u003c\/li\u003e\n\u003cli\u003eBattery BTV Cables: Male and female circular 3-pole connector with M8 screw ring Up to 50 batteries can be connected in one system \u003c\/li\u003e\n\u003cli\u003eLynx Distributor Fuse Monitoring (up to 4 modules): RJ10 (cable ships with each Lynx Distributor)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePhysical:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnclosure Material: ABS \u003c\/li\u003e\n\u003cli\u003eEnclosure Dimensions (H x W x D): 190 x 180 x 80 mm \u003c\/li\u003e\n\u003cli\u003eUnit Weight: 1.9 kg \u003c\/li\u003e\n\u003cli\u003eBusbar Material: Tinned copper \u003c\/li\u003e\n\u003cli\u003eBusbar Dimensions (H x W): 8 x 30 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnvironmental:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating Temperature Range: -40 °C to +60 °C \u003c\/li\u003e\n\u003cli\u003eStorage Temperature Range: -40 °C to +60 °C \u003c\/li\u003e\n\u003cli\u003eHumidity: Max. 95 % (non-condensing) \u003c\/li\u003e\n\u003cli\u003eProtection Class: IP22\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSafety: EN-IEC 63000:2018 \u003c\/li\u003e\n\u003cli\u003eEMC: EN-IEC 61000-6-3:2007\/A1:2011\/AC:2012 \u003c\/li\u003e\n\u003cli\u003eQMS: NEN-EN-ISO 9001:2015\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667533876,"sku":"LYN034160310","price":884.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-lynx-smart-bms-500-ng-m10battery-management-systemslyn034160310-4300299.jpg?v=1769782689"},{"product_id":"victron-lynx-smart-bms-1000-ng-m10-mgmt-system","title":"Victron Lynx Smart BMS 1000 NG (M10) MGMT System","description":"\u003cp\u003e\u003cstrong\u003eLynx Smart BMS 1000 NG (M10) MGMT System\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThe Lynx Smart BMS NG is a dedicated Battery Management System (BMS) designed specifically for the Victron Lithium NG batteries. These batteries utilize Lithium Iron Phosphate (LiFePO4) technology and are available in 12.8 V, 25.6 V, and 51.2 V variants with various capacities. They can be configured in series, parallel, and series\/parallel arrangements, allowing for the creation of battery banks with system voltages of 12V, 24V, or 48V. The maximum number of batteries in a single system is 50, enabling a maximum energy storage of 192kWh in a 12V system and up to 384kWh in a 24V and 48V system. For comprehensive details about these batteries, visit the Victron Lithium NG battery product page. \u003c\/p\u003e\u003cp\u003eOut of the various BMSes available* for the Lithium NG batteries, the Lynx Smart BMS NG is the most feature-rich and complete option and integrates seamlessly with other M10 products in the Lynx Distributor system. It is available in 500 A (M10) and 1000 A (M10) versions\u003csup\u003e1\u003c\/sup\u003e).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt-in 500 A or 1000 A Contactor \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLynx Smart BMS NG 500A A Lynx Smart BMS NG 1000A \u003c\/li\u003e\n\u003cli\u003eAvailable in 500 A (M10) and 1000 A (M10) versions\u003c\/li\u003e\n\u003cli\u003eActs as a secondary safety system to protect the battery in case primary controls (ATC, ATD, and\/or DVCC) fail\u003c\/li\u003e\n\u003cli\u003eSuitable as a remote controllable main system switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-charge Circuit \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents high inrush currents when connecting capacitive loads like inverters\u003c\/li\u003e\n\u003cli\u003eEliminates the need for external pre-charging devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMonitoring \u0026amp; Control \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBluetooth connectivity for monitoring and control via the VictronConnect App or VE.Can connectivity in combination with GX devices such as the Cerbo GX or Ekrano GX and the VRM portal\u003c\/li\u003e\n\u003cli\u003eReadout of cell voltages and temperatures also on GX devices and the VRM portal\u003c\/li\u003e\n\u003cli\u003eBuilt-in battery monitor provides data such as state of charge, voltage, current, historical data, status info, and more in real-time\u003c\/li\u003e\n\u003cli\u003eDiagnostic at a glance with Instant Readout\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDVCC Closed Loop Control as well as ATC\/ATD Contacts \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible Victron inverter\/chargers, the Orion XS 12\/12-50A DC-DC battery charger, and solar charge controllers are automatically controlled via a connected GX device and DVCC.\u003c\/li\u003e\n\u003cli\u003eATC\/ATD contacts can be used to control other chargers and loads that have a remote on\/off port\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProgrammable Relay \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCan be used either as an alarm relay (combined with the pre-alarm) or to control an alternator via its external regulator (ignition cable)\u003c\/li\u003e\n\u003cli\u003eFeatures Alternator ATC mode for safe alternator disconnection before battery disconnects\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAUX Terminal \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOnboard auxiliary power supply (1.1 A @ system voltage) for powering specific loads (i.e. a GX device) post-BMS shutdown\u003c\/li\u003e\n\u003cli\u003eAutomatic shutdown of BMS and AUX connection if no charge voltage is detected within 5 minutes after a low voltage event\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVE.Can and NMEA 2000 Data Communication \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasy connection and communication with GX devices via VE.Can using a standard RJ45 network cable\u003c\/li\u003e\n\u003cli\u003eIntegration into marine networks via NMEA 2000 protocol (requires a VE.Can to NMEA 2000 micro-C male cable)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eLynx Distributor Fuse Monitoring \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMonitor fuse status of up to 4 connected Lynx Distributors via VictronConnect or GX devices\u003c\/li\u003e\n\u003cli\u003eReceive alarms in case of blown fuses\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003csup\u003e1\u003c\/sup\u003e) Up to 5 BMS-es can be paralleled. This requires a firmware update, expected in Q3 2024.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery Voltage Range: 9 – 60 VDC \u003c\/li\u003e\n\u003cli\u003eMaximum Input Voltage: 75 VDC \u003c\/li\u003e\n\u003cli\u003eSupported System Voltages: 12, 24, or 48 V \u003c\/li\u003e\n\u003cli\u003eReverse Polarity Protection: No \u003c\/li\u003e\n\u003cli\u003eMain Safety Contactor Continuous Current Rating: 1000 A continuous \u003c\/li\u003e\n\u003cli\u003eMain Safety Contactor Peak Current Rating: 1200 A for 5 minutes\u003c\/li\u003e\n\u003cli\u003ePower Consumption OFF Mode: 0.3 mA for all system voltages \u003c\/li\u003e\n\u003cli\u003ePower Consumption in Standby Mode: Approximately 0.6 W (50 mA at 12 V) \u003c\/li\u003e\n\u003cli\u003ePower Consumption in ON Mode: Approximately 4.2 W (350 mA at 12 V) depending on the state of the relays\u003c\/li\u003e\n\u003cli\u003eMinimum Load Resistance for Pre-Charging: 10 Ω and above for 12 V systems 20 Ω and above for 24 V and 48 V systems \u003c\/li\u003e\n\u003cli\u003eAUX Output Maximum Current Rating: 1.1 A continuous, protected by resettable fuse \u003c\/li\u003e\n\u003cli\u003eAllow-to-Charge Port Maximum Current Rating: 0.5 A at 60 VDC, protected by resettable fuse \u003c\/li\u003e\n\u003cli\u003eAllow-to-Discharge Port Maximum Current Rating: 0.5 A at 60VDC, protected by resettable fuse\u003c\/li\u003e\n\u003cli\u003eAlarm Relay (SPDT) Maximum Current Rating: 2 A at 60 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBusbar: M10 (Torque: 33 Nm) – can be combined with all M10 Lynx products \u003c\/li\u003e\n\u003cli\u003eVE.Can: RJ45 \u003c\/li\u003e\n\u003cli\u003eI\/O: Removable multi-connector with screw terminals \u003c\/li\u003e\n\u003cli\u003eBattery BTV Cables: Male and female circular 3-pole connector with M8 screw ring Up to 50 batteries can be connected in one system \u003c\/li\u003e\n\u003cli\u003eLynx Distributor Fuse Monitoring (up to 4 modules): RJ10 (cable ships with each Lynx Distributor)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePhysical:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnclosure Material: ABS \u003c\/li\u003e\n\u003cli\u003eEnclosure Dimensions (H x W x D): 230 x 180 x 100 mm\u003c\/li\u003e\n\u003cli\u003eUnit Weight: 2.7 kg \u003c\/li\u003e\n\u003cli\u003eBusbar Material: Tinned copper \u003c\/li\u003e\n\u003cli\u003eBusbar Dimensions (H x W): 8 x 30 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnvironmental:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating Temperature Range: -40 °C to +60 °C \u003c\/li\u003e\n\u003cli\u003eStorage Temperature Range: -40 °C to +60 °C \u003c\/li\u003e\n\u003cli\u003eHumidity: Max. 95 % (non-condensing) \u003c\/li\u003e\n\u003cli\u003eProtection Class: IP22\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSafety: EN-IEC 63000:2018 \u003c\/li\u003e\n\u003cli\u003eEMC: EN-IEC 61000-6-3:2007\/A1:2011\/AC:2012 \u003c\/li\u003e\n\u003cli\u003eQMS: NEN-EN-ISO 9001:2015\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667566644,"sku":"LYN034170310","price":1178.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-lynx-smart-bms-1000-ng-m10-mgmt-systembattery-management-systemslyn034170310-4780653.jpg?v=1769782689"},{"product_id":"victron-lynx-shunt-ve-can-m10","title":"Victron Lynx Shunt VE.Can (M10)","description":"\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eLynx Shunt VE.Can (M10)\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eBusbar Integrated Battery Monitoring \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Lynx Shunt VE.Can contain a positive and negative busbar, a battery monitor, and a fuse holder for the main system fuse. It is part of the Lynx Distribution system. The Lynx Distributor has a power LED. The Lynx Shunt VE.Can can communicate via VE.Can with a GX device. \u003c\/p\u003e\u003cp\u003eThe Lynx Shunt VE.Can ship with two RJ45 VE.Can terminators, be used when connecting to a GX device.  \u003c\/p\u003e\u003cp\u003eThe Lynx Shunt VE.Can is designed to hold a CNN fuse. The fuse needs to be purchased separately. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Lynx Distribution System \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Lynx Distribution System is a modular busbar system incorporating DC connections, distribution, fusing, battery monitoring, and Lithium battery management. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Lynx Distribution System Consists of the Following Parts: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLynx Power In - A positive and negative busbar with 4 batteries or DC equipment connections.\u003c\/li\u003e\n\u003cli\u003eLynx Distributor - A positive and negative busbar with 4 fused connections for batteries or DC equipment together with fuse monitoring\u003c\/li\u003e\n\u003cli\u003eLynx Shunt VE.Can - A positive busbar with a space for a main system fuse and a negative busbar with a shunt for battery monitoring. It has VE.Can communication for monitoring and setup with a GX device\u003c\/li\u003e\n\u003cli\u003eLynx Smart BMS - For use together with Victron Energy Smart Lithium batteries. It contains a positive busbar with a contactor that is driven by a battery management system (BMS) and a negative busbar with a shunt for battery monitoring. It has Bluetooth communication for monitoring and setup via the VictronConnect App and VE.Can communication for monitoring with a GX device and the VRM portal\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSupply Voltage Range: 9 - 70 Vdc\u003c\/li\u003e\n\u003cli\u003eSupported System Voltages: 12, 24 or 48V \u003c\/li\u003e\n\u003cli\u003eReverse Polarity Protection: No \u003c\/li\u003e\n\u003cli\u003eCurrent Rating: 1000Adc continuous \u003c\/li\u003e\n\u003cli\u003ePower Consumption: 60mA @ 12V, 33mA @ 24V, 20mA @ 48V \u003c\/li\u003e\n\u003cli\u003ePotential Free Alarm Contact 3A, 30Vdc, 250Vac\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBusbar: M8\u003c\/li\u003e\n\u003cli\u003eFuse: M8 \u003c\/li\u003e\n\u003cli\u003eVE.Can: RJ45 and RJ45 terminator \u003c\/li\u003e\n\u003cli\u003ePower Supply Connection to Lynx Distributor: RJ10 (an RJ10 cable ships with each Lynx Distributor)\u003c\/li\u003e\n\u003cli\u003eTemperature Sensor: Screw terminal \u003c\/li\u003e\n\u003cli\u003eRelay: Screw terminal\u003cstrong\u003e \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePhysical:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnclosure Material: ABS\u003c\/li\u003e\n\u003cli\u003eEnclosure Dimensions (H x W x D): 190 x 180 x 80 mm \u003c\/li\u003e\n\u003cli\u003eUnit Weight: 1.4 kg \u003c\/li\u003e\n\u003cli\u003eBusbar Material: Tinned copper \u003c\/li\u003e\n\u003cli\u003eBusbar Dimensions (H x W): 8 x 30 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnvironmental\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating Temperature Range: -40°C to +60° \u003c\/li\u003e\n\u003cli\u003eStorage Temperature Range: -40°C to +60° \u003c\/li\u003e\n\u003cli\u003eHumidity: Max. 95% (non-condensing) \u003c\/li\u003e\n\u003cli\u003eProtection Class: IP22\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667599412,"sku":"LYN040102110","price":391.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-lynx-shunt-vecan-m10fuse-blocks-fuseslyn040102110-9616304.jpg?v=1769782689"},{"product_id":"victron-smartsolar-mppt-150-100-mc4-ve-can","title":"Victron SmartSolar MPPT 150\/100-MC4 VE-Can","description":"\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT 150\/100-MC4 VE-Can\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThe MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges battery banks.\u003c\/p\u003e\u003cp\u003eThe SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged.\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eModels: 12\/24\/36\/48 Volt\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli id=\"isPasted\"\u003eUltra-fast Maximum Power Point Tracking (MPPT)\u003c\/li\u003e\n\u003cli\u003eAdvanced Maximum Power Point Detection in case of partial shading conditions \u003c\/li\u003e\n\u003cli\u003eOutstanding conversion efficiency\u003c\/li\u003e\n\u003cli\u003eFlexible charge algorithm\u003c\/li\u003e\n\u003cli\u003eExtensive electronic protection \u003c\/li\u003e\n\u003cli\u003eBluetooth Smart built-in \u003c\/li\u003e\n\u003cli\u003eInternal temperature sensor and optional external battery voltage and temperature sensing via\u003c\/li\u003e\n\u003cli\u003eBluetooth\u003c\/li\u003e\n\u003cli\u003eFully discharged battery recovery function \u003c\/li\u003e\n\u003cli\u003eVE.Can: the multiple controller solution\u003c\/li\u003e\n\u003cli\u003eVE.Direct or VE.Can\u003c\/li\u003e\n\u003cli\u003eRemote on-off\u003c\/li\u003e\n\u003cli\u003eProgrammable relay\u003c\/li\u003e\n\u003cli\u003eOptional: SmartSolar pluggable LCD\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811667632180,"sku":"SCC115110511","price":553.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartsolar-mppt-150100-mc4-ve-cansolar-charge-controllersscc115110511-3136825.jpg?v=1769782689"},{"product_id":"victron-battery-monitor-bmv-702-black","title":"Victron Battery Monitor - BMV-702 - Black","description":"\u003cp\u003e\u003cstrong\u003eBattery Monitor - BMV-702 - Black\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery ‘fuel gauge’, time-to-go indicator, and much more The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account. Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts. The BMV-702 features an additional input which can be programmed to measure the voltage (of a second battery), battery temperature or midpoint voltage (see below). \u003c\/li\u003e\n\u003cli\u003eBluetooth Smart Use the Bluetooth Smart dongle to monitor your batteries on Apple or Android smartphones, tablets, macbooks and other devices. \u003c\/li\u003e\n\u003cli\u003eEasy to install All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting. \u003c\/li\u003e\n\u003cli\u003eEasy to program (with your smartphone!) A quick install menu and a detailed setup menu with scrolling texts assist the user when going through the various settings. Alternatively, choose the fast and easy solution: download the smartphone app (Bluetooth Smart dongle needed) \u003c\/li\u003e\n\u003cli\u003eStandard features - Battery voltage, current, power, ampere-hours consumed and state of charge - Remaining time at the current rate of discharge - Programmable visual and audible alarm - Programmable relay, to turn off non critical loads or to run a generator when needed - 500 Amp quick connect shunt and connection kit - Shunt selection capability up to 10.000 Amps - VE.Direct communication port - Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health - Wide input voltage range: 6,5 – 95V - High current measurement resolution: 10 mA (0,01A) - Low current consumption: 2,9Ah per month (4mA) @12V and 2,2Ah per month (3mA) @ 24V\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811736674356,"sku":"BAM010702200R","price":141.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-battery-monitor-bmv-702-blackbattery-monitors-shuntsbam010702200r-7917837.jpg?v=1769782690"},{"product_id":"victron-lynx-shunt-ve-can","title":"Victron Lynx Shunt VE. Can","description":"\u003cp\u003e\u003cstrong\u003eLynx Shunt VE. Can \u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Lynx Shunt VE.Can is an intelligent 1000A shunt with location for a fuse (not included), the built in battery monitor accurately monitors the state of charge of your battery.  The Lynx shunt contains a positive bus-bar with space to mount a CNN fuse and a negative bus-bar with a shunt. It also contains battery monitoring electronics. The Lynx shunt can send via the VE.CAN bus battery monitoring information to a CCGX or VGX or to a third party CANbus monitoring system, such as a NMEA2000. The CCGX, VGX or third party display acts as battery monitor display and is also used to set up the built-in battery monitor.\u003c\/p\u003e\u003cp\u003eThe Lynx shunt is available with a VE.Can connection.  \u003c\/p\u003e\u003cp\u003eFuse CIP140325000 - Fuse CNN 325A\/80V for Lynx shunt, or alternatively a CNN fuses by Littlefuse can be used.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811736805428,"sku":"LYN040102100","price":355.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-lynx-shunt-ve-canfuse-blocks-fuseslyn040102100-6492303.jpg?v=1769782689"},{"product_id":"victron-smart-battery-monitor-bmv-712-grey-bluetooth-capable","title":"Victron Smart Battery Monitor - BMV-712 - Grey - Bluetooth Capable","description":"\u003cp\u003e\u003cstrong\u003eSmart Battery Monitor - BMV-712 - Grey - Bluetooth Capable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBluetooth inside With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance. \u003c\/li\u003e\n\u003cli\u003eDownload the Victron Bluetooth app Use a smartphone or other Bluetooth enabled device to - customize settings, - monitor all important data on single screen, - view historical data, and to - update the software when new features become available. \u003c\/li\u003e\n\u003cli\u003eEasy to install All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance, a securing ring for rear mounting and screws for front mounting. \u003c\/li\u003e\n\u003cli\u003eMidpoint voltage monitoring One bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual, section 5.2, for more information. We recommend our Battery Balancer (BMS012201000) to maximize service life of series-connected lead-acid batteries. \u003c\/li\u003e\n\u003cli\u003eVery low current draw from the battery Current consumption: 0,7Ah per month (1mA) @12V and 0,6Ah per month (0,8mA) @ 24V Especially Li-ion batteries have virtually no capacity left when discharged until low voltage shutdown. After shutdown due to low cell voltage, the capacity reserve of a Li-ion battery is approximately 1Ah per 100Ah battery capacity. The battery will be damaged if the remaining capacity reserve is drawn from the battery. A residual current of 10mA for example may damage a 200Ah battery if the system is left in discharged state during more than 8 days. \u003c\/li\u003e\n\u003cli\u003eBi-stable alarm relay Prevents increased current draw in case of an alarm. \u003c\/li\u003e\n\u003cli\u003eOther features - Battery voltage, current, power, ampere-hours consumed and state of charge - Remaining time at the current rate of discharge - Programmable visual and audible alarm - Programmable relay, to turn off non critical loads or to run a generator when needed - 500 Amp quick connect shunt and connection kit - Shunt selection capability up to 10.000 Amps - VE.Direct communication port - Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health - Wide input voltage range: 6,5 – 70V - High current measurement resolution: 10 mA (0,01A)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811737133108,"sku":"BAM030712000R","price":161.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smart-battery-monitor-bmv-712-grey-bluetooth-capablebattery-monitors-shuntsbam030712000r-9217140.jpg?v=1769782689"},{"product_id":"victron-temperature-sensor-f-bmv-712-smart-amp-bmv-702","title":"Victron Temperature Sensor f\/BMV-712 Smart \u0026 BMV-702","description":"\u003cp\u003e\u003cstrong\u003eTemperature Sensor for BMV-712 Smart \u0026amp; BMV-702\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVictron's Temperature Sensor specifically for the BMV-712 and the BMV-702.\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811737296948,"sku":"ASS000100000","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-temperature-sensor-fbmv-712-smart-bmv-702accessoriesass000100000-8942004.jpg?v=1769782689"},{"product_id":"victron-bluesolar-mppt-charge-controller-75v-10amp-ul-approved","title":"Victron BlueSolar MPPT Charge Controller - 75V - 10AMP - UL Approved","description":"\u003cp\u003e\u003cstrong\u003eBlueSolar MPPT Charge Controller - 75V - 10AMP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUltra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. \u003c\/li\u003e\n\u003cli\u003eLoad output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. \u003c\/li\u003e\n\u003cli\u003eBattery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. \u003c\/li\u003e\n\u003cli\u003eProgrammable battery charge algorithm See the software section on our website for details \u003c\/li\u003e\n\u003cli\u003eDay\/night timing and light dimming option See the software section on our website for details \u003c\/li\u003e\n\u003cli\u003eProgramming, real-time data and history display options - Color Control GX or other GX devices: see the Venus documents on our website. - A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811737428020,"sku":"SCC010010050R","price":56.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-bluesolar-mppt-charge-controller-75v-10amp-ul-approvedsolar-charge-controllersscc010010050r-4439686.jpg?v=1769782690"},{"product_id":"victron-bluesolar-mppt-charge-controller-75v-15amp-ul-approved","title":"Victron BlueSolar MPPT Charge Controller - 75V - 15AMP - UL Approved","description":"\u003cp\u003e\u003cstrong\u003eBlueSolar MPPT Charge Controller - 75V - 15AMP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUltra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. \u003c\/li\u003e\n\u003cli\u003eLoad output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. \u003c\/li\u003e\n\u003cli\u003eBattery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. \u003c\/li\u003e\n\u003cli\u003eProgrammable battery charge algorithm See the software section on our website for details \u003c\/li\u003e\n\u003cli\u003eDay\/night timing and light dimming option See the software section on our website for details \u003c\/li\u003e\n\u003cli\u003eProgramming, real-time data and history display options - Color Control GX or other GX devices: see the Venus documents on our website. - A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811737559092,"sku":"SCC010015050R","price":61.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-bluesolar-mppt-charge-controller-75v-15amp-ul-approvedsolar-charge-controllersscc010015050r-6007789.jpg?v=1769782689"},{"product_id":"victron-bluesolar-mppt-charge-controller-100v-15amp-ul-approved","title":"Victron BlueSolar MPPT Charge Controller - 100V - 15AMP - UL Approved","description":"\u003cp\u003e\u003cstrong\u003eBlueSolar MPPT Charge Controller - 100V - 15AMP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUltra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. \u003c\/li\u003e\n\u003cli\u003eLoad output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. \u003c\/li\u003e\n\u003cli\u003eBattery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. \u003c\/li\u003e\n\u003cli\u003eProgrammable battery charge algorithm See the software section on our website for details \u003c\/li\u003e\n\u003cli\u003eDay\/night timing and light dimming option See the software section on our website for details \u003c\/li\u003e\n\u003cli\u003eProgramming, real-time data and history display options - Color Control GX or other GX devices: see the Venus documents on our website. - A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811737722932,"sku":"SCC010015200R","price":72.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-bluesolar-mppt-charge-controller-100v-15amp-ul-approvedsolar-charge-controllersscc010015200r-7086779.jpg?v=1769782689"},{"product_id":"victron-smartsolar-mppt-solar-charge-controller-75v-10amp-ul-approved","title":"Victron SmartSolar MPPT Solar Charge Controller - 75V - 10Amp - UL Approved","description":"\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT Charge Controller - 75V - 10AMP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. \u003c\/li\u003e\n\u003cli\u003eVE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices \u003c\/li\u003e\n\u003cli\u003eUltra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. \u003c\/li\u003e\n\u003cli\u003eLoad output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. \u003c\/li\u003e\n\u003cli\u003eBattery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. \u003c\/li\u003e\n\u003cli\u003eProgrammable battery charge algorithm See the software section on our website for details \u003c\/li\u003e\n\u003cli\u003eDay\/night timing and light dimming option See the software section on our website for details \u003c\/li\u003e\n\u003cli\u003eInternal temperature sensor Compensates absorption and float charge voltage for temperature. \u003c\/li\u003e\n\u003cli\u003eOptional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811737919540,"sku":"SCC075010060R","price":73.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartsolar-mppt-solar-charge-controller-75v-10amp-ul-approvedsolar-charge-controllersscc075010060r-1071606.jpg?v=1769782689"},{"product_id":"victron-smartsolar-mppt-solar-charge-controller-75v-15amp-ul-approved","title":"Victron SmartSolar MPPT Solar Charge Controller - 75V - 15Amp - UL Approved","description":"\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT Charge Controller - 75V - 15AMP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. \u003c\/li\u003e\n\u003cli\u003eVE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices \u003c\/li\u003e\n\u003cli\u003eUltra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. \u003c\/li\u003e\n\u003cli\u003eLoad output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. \u003c\/li\u003e\n\u003cli\u003eBattery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. \u003c\/li\u003e\n\u003cli\u003eProgrammable battery charge algorithm See the software section on our website for details \u003c\/li\u003e\n\u003cli\u003eDay\/night timing and light dimming option See the software section on our website for details \u003c\/li\u003e\n\u003cli\u003eInternal temperature sensor Compensates absorption and float charge voltage for temperature. \u003c\/li\u003e\n\u003cli\u003eOptional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811738116148,"sku":"SCC075015060R","price":78.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartsolar-mppt-solar-charge-controller-75v-15amp-ul-approvedsolar-charge-controllersscc075015060r-4227223.jpg?v=1769782630"},{"product_id":"victron-smartsolar-mppt-charge-controller-100v-15amp-ul-approved","title":"Victron SmartSolar MPPT Charge Controller - 100V - 15AMP - UL Approved","description":"\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT Charge Controller - 100V - 15AMP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. \u003c\/li\u003e\n\u003cli\u003eVE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices \u003c\/li\u003e\n\u003cli\u003eUltra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. \u003c\/li\u003e\n\u003cli\u003eLoad output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. \u003c\/li\u003e\n\u003cli\u003eBattery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. \u003c\/li\u003e\n\u003cli\u003eProgrammable battery charge algorithm See the software section on our website for details \u003c\/li\u003e\n\u003cli\u003eDay\/night timing and light dimming option See the software section on our website for details \u003c\/li\u003e\n\u003cli\u003eInternal temperature sensor Compensates absorption and float charge voltage for temperature. \u003c\/li\u003e\n\u003cli\u003eOptional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811738279988,"sku":"SCC110015060R","price":89.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartsolar-mppt-charge-controller-100v-15amp-ul-approvedsolar-charge-controllersscc110015060r-4215451.jpg?v=1769782629"},{"product_id":"victron-smartsolar-mppt-charge-controller-100v-30amp-ul-approved","title":"Victron SmartSolar MPPT Charge Controller - 100V - 30AMP - UL Approved","description":"\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT Charge Controller - 100V - 30AMP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. \u003c\/li\u003e\n\u003cli\u003eVE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices \u003c\/li\u003e\n\u003cli\u003eUltra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. \u003c\/li\u003e\n\u003cli\u003eLoad output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. \u003c\/li\u003e\n\u003cli\u003eBattery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. \u003c\/li\u003e\n\u003cli\u003eProgrammable battery charge algorithm See the software section on our website for details \u003c\/li\u003e\n\u003cli\u003eDay\/night timing and light dimming option See the software section on our website for details \u003c\/li\u003e\n\u003cli\u003eInternal temperature sensor Compensates absorption and float charge voltage for temperature. \u003c\/li\u003e\n\u003cli\u003eOptional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811738443828,"sku":"SCC110030210","price":138.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartsolar-mppt-charge-controller-100v-30amp-ul-approvedsolar-charge-controllersscc110030210-4867186.jpg?v=1769782629"},{"product_id":"victron-smartsolar-mppt-charge-controller-100v-50amp-ul-approved","title":"Victron SmartSolar MPPT Charge Controller - 100V - 50AMP - UL Approved","description":"\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT Charge Controller - 100V - 50AMP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. \u003c\/li\u003e\n\u003cli\u003eVE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices \u003c\/li\u003e\n\u003cli\u003eUltra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. \u003c\/li\u003e\n\u003cli\u003eLoad output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. \u003c\/li\u003e\n\u003cli\u003eBattery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. \u003c\/li\u003e\n\u003cli\u003eProgrammable battery charge algorithm See the software section on our website for details \u003c\/li\u003e\n\u003cli\u003eDay\/night timing and light dimming option See the software section on our website for details \u003c\/li\u003e\n\u003cli\u003eInternal temperature sensor Compensates absorption and float charge voltage for temperature. \u003c\/li\u003e\n\u003cli\u003eOptional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811738607668,"sku":"SCC110050210","price":194.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartsolar-mppt-charge-controller-100v-50amp-ul-approvedsolar-charge-controllersscc110050210-3558475.jpg?v=1769782629"},{"product_id":"victron-modular-fuse-holder-f-mega-fuse","title":"Victron Modular Fuse Holder f\/MEGA Fuse","description":"\u003cp\u003e\u003cstrong\u003eModular Fuse Holder for MEGA Fuse\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe dovetail feature allows interlocking multiple fuse holders.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811738771508,"sku":"CIP100200100","price":40.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-modular-fuse-holder-fmega-fusefuse-blocks-fusescip100200100-9145951.jpg?v=1769782629"},{"product_id":"victron-holder-mega-fuse","title":"Victron Holder MEGA Fuse","description":"\u003cp\u003e\u003cstrong\u003eHolder MEGA Fuse\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVictron MEGA Fuse Holder is made of high quality material and very durable, not cheap flimsy plastic. Fits all of Victron’s MEGA fuses.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811738935348,"sku":"CIP000100001","price":20.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-holder-mega-fusefuse-blocks-fusescip000100001-7174415.jpg?v=1769782629"},{"product_id":"victron-bmv-700-battery-monitor-grey","title":"Victron BMV-700 Battery Monitor - Grey","description":"\u003cp\u003e\u003cstrong\u003eBMV-700 Battery Monitor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe BMV-700 is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery voltage, current, power, ampere-hours consumed and state of charge \u003c\/li\u003e\n\u003cli\u003eRemaining time at the current rate of discharge \u003c\/li\u003e\n\u003cli\u003eProgrammable visual and audible alarm \u003c\/li\u003e\n\u003cli\u003eProgrammable relay, to turn off non critical loads or to run a generator when needed \u003c\/li\u003e\n\u003cli\u003e500 Amp quick connect shunt and connection kit \u003c\/li\u003e\n\u003cli\u003eShunt selection capability up to 10.000 Amps \u003c\/li\u003e\n\u003cli\u003eVE.Direct communication port \u003c\/li\u003e\n\u003cli\u003eStores a wide range of historical events, which can be used to evaluate usage patterns and battery health \u003c\/li\u003e\n\u003cli\u003eWide input voltage range: 6,5 – 95V \u003c\/li\u003e\n\u003cli\u003eHigh current measurement resolution: 10 mA (0,01A) \u003c\/li\u003e\n\u003cli\u003eLow current consumption: 2,9Ah per month (4mA) @12V and 2,2Ah per month (3mA) @ 24V\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVictronConnect\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811739131956,"sku":"BAM010700000R","price":115.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-bmv-700-battery-monitor-greybattery-monitors-shuntsbam010700000r-8927223.jpg?v=1769782629"},{"product_id":"victron-bmv-712-black-smart-battery-monitor","title":"Victron BMV-712 Black Smart Battery Monitor","description":"\u003cp\u003e\u003cstrong\u003eBMV-712 Black Smart Battery Monitor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery voltage, current, power, ampere-hours consumed and state of charge\u003c\/li\u003e\n\u003cli\u003eRemaining time at the current rate of discharge \u003c\/li\u003e\n\u003cli\u003eProgrammable visual and audible alarm \u003c\/li\u003e\n\u003cli\u003eProgrammable relay, to turn off non critical loads or to run a generator when needed \u003c\/li\u003e\n\u003cli\u003e500 Amp quick connect shunt and connection kit \u003c\/li\u003e\n\u003cli\u003eShunt selection capability up to 10.000 Amps \u003c\/li\u003e\n\u003cli\u003eVE.Direct communication port \u003c\/li\u003e\n\u003cli\u003eStores a wide range of historical events, which can be used to evaluate usage patterns and battery health \u003c\/li\u003e\n\u003cli\u003eWide input voltage range: 6,5 – 70V \u003c\/li\u003e\n\u003cli\u003eHigh current measurement resolution: 10 mA (0,01A) \u003c\/li\u003e\n\u003cli\u003eAdditional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVictronConnect\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811739263028,"sku":"BAM030712200","price":161.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-bmv-712-black-smart-battery-monitorbattery-monitors-shuntsbam030712200-9909733.jpg?v=1769782629"},{"product_id":"victron-smartshunt-1000amp-50mv-bluetooth-smart-battery-shunt","title":"Victron SmartShunt 1000AMP\/50MV Bluetooth Smart Battery Shunt","description":"\u003cp\u003e\u003cstrong\u003eSmartShunt 1000AMP\/50MV Bluetooth Smart Battery Shunt\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.\u003c\/p\u003e\u003cp\u003eAlternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.\u003c\/p\u003e\u003cp\u003eThe SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.\u003c\/p\u003e\u003cp\u003eThe SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVictronConnect\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle. \u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811739852852,"sku":"SHU050210050","price":167.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartshunt-1000amp50mv-bluetooth-smart-battery-shuntbattery-monitors-shuntsshu050210050-4477509.jpg?v=1769782629"},{"product_id":"victron-smartshunt-2000amp-50mv-bluetooth-smart-battery-shunt","title":"Victron SmartShunt 2000AMP\/50MV Bluetooth Smart Battery Shunt","description":"\u003cp\u003e\u003cstrong\u003eSmartShunt 2000AMP\/50MV Bluetooth Smart Battery Shunt\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.\u003c\/p\u003e\u003cp\u003eAlternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.\u003c\/p\u003e\u003cp\u003eThe SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.\u003c\/p\u003e\u003cp\u003eThe SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVictronConnect\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle. \u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811740049460,"sku":"SHU050220050","price":226.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartshunt-2000amp50mv-bluetooth-smart-battery-shuntbattery-monitors-shuntsshu050220050-9182718.jpg?v=1769782629"},{"product_id":"victron-smartshunt-500amp-50mv-bluetooth-smart-battery-shunt","title":"Victron SmartShunt 500AMP\/50MV Bluetooth Smart Battery Shunt","description":"\u003cp\u003e\u003cstrong\u003eSmartShunt 500AMP\/50MV Bluetooth Smart Battery Shunt\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Smart Battery Shunt\u003c\/p\u003e\u003cp\u003eThe SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.\u003c\/p\u003e\u003cp\u003eAlternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.\u003c\/p\u003e\u003cp\u003eThe SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.\u003cbr\u003eThe SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVictronConnect\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811740278836,"sku":"SHU050150050","price":106.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-smartshunt-500amp50mv-bluetooth-smart-battery-shuntbattery-monitors-shuntsshu050150050-7624439.jpg?v=1769782629"},{"product_id":"victron-orion-tr-smart-12-12-30-30a-360w-isolated-dc-dc-charger-or-power-supply","title":"Victron Orion-TR Smart 12\/12-30 30A (360W) Isolated DC-DC Charger or Power Supply","description":"\u003cp\u003e\u003cstrong\u003eOrion-TR Smart 12\/12-30A (360W) Isolated DC-DC Charger or Power Supply\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Orion-Tr Smart isolated DC-DC charger serves as a DC-DC battery charger or a power supply (also designed for use as a constant voltage source), offering a wide input and output voltage range. This is especially significant in the case of vehicles with a Euro 5 or Euro 6 smart alternator, which often supplies too low charging voltage even when the engine is running or when extended cable lengths, as is often the case in boats and RVs, lead to voltage drops. In such scenarios, precise and controlled charging is imperative to fully charge the service battery while protecting the starter\/input battery from discharge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBluetooth Smart Enabled\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAny Bluetooth-enabled smartphone, tablet, or other device can be used to monitor, change settings, and update the charger when new software features become available\u003c\/li\u003e\n\u003cli\u003eInstant Readout: The VictronConnect App can display key data, including warnings and alarms, on the device list page without the need to connect to the product\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFully programmable\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery charge algorithm (configurable) or fixed output. \u003c\/li\u003e\n\u003cli\u003eSmart Alternator Compatibility: engine running detection mechanism\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAdaptive 3-Stage Charge Algorithm: Bulk – Absorption – Float\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor lead-acid batteries, it is important that during shallow discharges the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged\u003c\/li\u003e\n\u003cli\u003eFor lithium batteries, the absorption time is fixed; the default is 2 hours\u003c\/li\u003e\n\u003cli\u003eAlternatively, a fixed output voltage can be chosen\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSuitable for Use in Vehicles with a Smart Alternator (Euro 5 and Euro 6 Engines)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe built-in engine shutdown detection will stop the converter when the engine is not running. This prevents unwanted discharge of the starter battery (see manual for details).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRemote On\/Off\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA remote on\/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll Models Are Short Circuit Proof and Can Be Paralleled to Increase Output Current\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn unlimited number of units can be connected in parallel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHigh Temperature Protected\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe output current will reduce at high ambient temperatures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIP43 Protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen installed with the screw terminals oriented downward.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScrew Terminals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo special tools are needed for installation. Input fuse (not replaceable) \u003c\/p\u003e\u003cp\u003e*Input fuse (not replaceable) \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage Range: 10-17 V\u003c\/li\u003e\n\u003cli\u003eUnder Voltage Shut Down: 7 V\u003c\/li\u003e\n\u003cli\u003eUnder Voltage Restart: 7.5 V\u003c\/li\u003e\n\u003cli\u003eNominal Output Voltage: 12.2 V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Adjust Range: 10-15 V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Tolerance: +\/- 0,2 V\u003c\/li\u003e\n\u003cli\u003eOutput Noise: 2 mV rms\u003c\/li\u003e\n\u003cli\u003eCont. Output Current at Nominal Output Voltage and 40 Degrees C: 30 A\u003c\/li\u003e\n\u003cli\u003eMaximum Output Current (10 S) at Nominal Output Voltage minus 20%: 40 A\u003c\/li\u003e\n\u003cli\u003eShort Circuit Output Current: 60 A\u003c\/li\u003e\n\u003cli\u003eCont. Output Power at 25 Degrees C: 430 W\u003c\/li\u003e\n\u003cli\u003eCont. Output Power at 40 Degrees C: 360 W\u003c\/li\u003e\n\u003cli\u003eEfficiency: 87 %\u003c\/li\u003e\n\u003cli\u003eNo Load Input Current (2): \u0026lt; 80 mA \u003c\/li\u003e\n\u003cli\u003eStandby Current: Less than 1A\u003c\/li\u003e\n\u003cli\u003eCan Be Used as Power Supply: Yes, output voltage can be set with Bluetooth \u003c\/li\u003e\n\u003cli\u003eGalvanic Isolation: 200 VDC between input, output, and case \u003c\/li\u003e\n\u003cli\u003eOperating Temperature Range -20 to +55 °C (derate 3 % per °C above 40 °C) \u003c\/li\u003e\n\u003cli\u003eHumidity: Max. 95 % non-condensing \u003c\/li\u003e\n\u003cli\u003eDC Connection: Screw terminals \u003c\/li\u003e\n\u003cli\u003eMaximum Cable Cross-Section: 16 mm²  AWG6 \u003c\/li\u003e\n\u003cli\u003eWeight: 1,8 kg (3 lb) \u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D):130 x 186 x 70 mm  (5.1 x 7.3 x 2.8 inch) \u003c\/li\u003e\n\u003cli\u003eProtection Category IP43 (electronic components), IP22 (connection area) \u003c\/li\u003e\n\u003cli\u003eSafety Standards: EN 60950\u003c\/li\u003e\n\u003cli\u003eEmission\/Immunity Standards: EN 61000-6-3, EN 55014-1 \/ EN 61000-6-2, EN 61000-6-1, EN 55014-2\u003c\/li\u003e\n\u003cli\u003eAutomotive Directive Standards: ECE R10-5\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811740508212,"sku":"ORI121236120","price":243.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-orion-tr-smart-1212-30-30a-360w-isolated-dc-dc-charger-or-power-supplydc-to-dc-convertersori121236120-3534167.jpg?v=1769782629"},{"product_id":"victron-orion-tr-smart-12-12-18a-18a-220w-isolated-dc-dc-charger-or-power-supply","title":"Victron Orion-TR Smart 12\/12-18A 18A (220W) Isolated DC-DC Charger or Power Supply","description":"\u003cp\u003e\u003cstrong\u003eOrion-TR Smart 12\/12-18A (220W) Isolated DC-DC Charger or Power Supply\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Orion-Tr Smart isolated DC-DC charger serves as a DC-DC battery charger or a power supply (also designed for use as a constant voltage source), offering a wide input and output voltage range. This is especially significant in the case of vehicles with a Euro 5 or Euro 6 smart alternator, which often supplies too low charging voltage even when the engine is running or when extended cable lengths, as is often the case in boats and RVs, lead to voltage drops. In such scenarios, precise and controlled charging is imperative to fully charge the service battery while protecting the starter\/input battery from discharge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBluetooth Smart Enabled\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAny Bluetooth-enabled smartphone, tablet, or other device can be used to monitor, change settings, and update the charger when new software features become available\u003c\/li\u003e\n\u003cli\u003eInstant Readout: The VictronConnect App can display key data, including warnings and alarms, on the device list page without the need to connect to the product\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFully programmable\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery charge algorithm (configurable) or fixed output. \u003c\/li\u003e\n\u003cli\u003eSmart Alternator Compatibility: engine running detection mechanism\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAdaptive 3-Stage Charge Algorithm: Bulk – Absorption – Float\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor lead-acid batteries, it is important that during shallow discharges the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged\u003c\/li\u003e\n\u003cli\u003eFor lithium batteries, the absorption time is fixed; the default is 2 hours\u003c\/li\u003e\n\u003cli\u003eAlternatively, a fixed output voltage can be chosen\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSuitable for Use in Vehicles with a Smart Alternator (Euro 5 and Euro 6 Engines)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe built-in engine shutdown detection will stop the converter when the engine is not running. This prevents unwanted discharge of the starter battery (see manual for details).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRemote On\/Off\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA remote on\/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll Models Are Short Circuit Proof and Can Be Paralleled to Increase Output Current\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn unlimited number of units can be connected in parallel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHigh Temperature Protected\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe output current will reduce at high ambient temperatures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIP43 Protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen installed with the screw terminals oriented downward.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScrew Terminals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo special tools are needed for installation. Input fuse (not replaceable) \u003c\/p\u003e\u003cp\u003e*Input fuse (not replaceable) \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage Range: 8-17 V\u003c\/li\u003e\n\u003cli\u003eUnder Voltage Shut Down: 7 V\u003c\/li\u003e\n\u003cli\u003eUnder Voltage Restart: 7.5 V\u003c\/li\u003e\n\u003cli\u003eNominal Output Voltage: 12.2 V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Adjust Range: 10-15 V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Tolerance: +\/- 0,2 V\u003c\/li\u003e\n\u003cli\u003eOutput Noise: 2 mV rms\u003c\/li\u003e\n\u003cli\u003eCont. Output Current at Nominal Output Voltage and 40 Degrees C: 18 A\u003c\/li\u003e\n\u003cli\u003eMaximum Output Current (10 S) at Nominal Output Voltage minus 20%: 25 A\u003c\/li\u003e\n\u003cli\u003eShort Circuit Output Current: 40 A\u003c\/li\u003e\n\u003cli\u003eCont. Output Power at 25 Degrees C: 280 W\u003c\/li\u003e\n\u003cli\u003eCont. Output Power at 40 Degrees C: 220 W\u003c\/li\u003e\n\u003cli\u003eEfficiency: 87 %\u003c\/li\u003e\n\u003cli\u003eNo Load Input Current (2): \u0026lt; 80 mA \u003c\/li\u003e\n\u003cli\u003eStandby Current: Less than 1A\u003c\/li\u003e\n\u003cli\u003eCan Be Used as Power Supply: Yes, output voltage can be set with Bluetooth \u003c\/li\u003e\n\u003cli\u003eGalvanic Isolation: 200 VDC between input, output, and case \u003c\/li\u003e\n\u003cli\u003eOperating Temperature Range -20 to +55 °C (derate 3 % per °C above 40 °C) \u003c\/li\u003e\n\u003cli\u003eHumidity: Max. 95 % non-condensing \u003c\/li\u003e\n\u003cli\u003eDC Connection: Screw terminals \u003c\/li\u003e\n\u003cli\u003eMaximum Cable Cross-Section: 16 mm²  AWG6 \u003c\/li\u003e\n\u003cli\u003eWeight: 1,8 kg (3 lb) \u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D):130 x 186 x 70 mm  (5.1 x 7.3 x 2.8 inch) \u003c\/li\u003e\n\u003cli\u003eProtection Category IP43 (electronic components), IP22 (connection area) \u003c\/li\u003e\n\u003cli\u003eSafety Standards: EN 60950\u003c\/li\u003e\n\u003cli\u003eEmission\/Immunity Standards: EN 61000-6-3, EN 55014-1 \/ EN 61000-6-2, EN 61000-6-1, EN 55014-2\u003c\/li\u003e\n\u003cli\u003eAutomotive Directive Standards: ECE R10-5\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811740737588,"sku":"ORI121222120","price":162.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-orion-tr-smart-1212-18a-18a-220w-isolated-dc-dc-charger-or-power-supplydc-to-dc-convertersori121222120-2595381.jpg?v=1769782628"},{"product_id":"victron-energy-orion-tr-smart-12-12-30-30a-360w-non-isolated-dc-dc-charger-or-power-supply","title":"Victron Energy Orion-TR Smart 12\/12-30 30A (360W) Non-Isolated DC-DC Charger or Power Supply","description":"\u003cp\u003e\u003cstrong\u003eOrion-TR Smart 12\/12-30 30A (360W) Non-Isolated DC-DC or Power Supply\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.\u003c\/p\u003e\u003cp\u003eFor use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on\/off switch.\u003c\/p\u003e\u003cp\u003eThe Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.\u003c\/p\u003e\u003cp\u003eSuitable for high temperatures up to 55°C with a full rated output up to 40°C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVictronConnect\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lmm51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45811740868660,"sku":"ORI121236140","price":215.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/files\/victron-energy-orion-tr-smart-1212-30-30a-360w-non-isolated-dc-dc-charger-or-power-supplydc-to-dc-convertersori121236140-6119278.jpg?v=1769782629"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/8462\/1620\/collections\/victron-energy-9834549.png?v=1769780715","url":"https:\/\/offgridstores.com\/collections\/victron-energy.oembed?page=16","provider":"Off Grid Stores","version":"1.0","type":"link"}